Sale ends soon!
Screen Drying Cabinet Screen drying cabinet is an important tool in Screen Printing. Several procedures need a screen drying cabinet like degreasing screen, coating emulsion, coating hardener and washout and so on. Parameters: Voltage: 110V Power: 800W Max frame size: 25’x21’x1.8′ (64x53x4.5cm) Max. amount of drying plate: 4 pieces Highest temperature:126â(52â)Instructions: 1.Turn on the switch; then the machine will indicate âF000â and the air fan works automatically. 2.Press â+â until to âF070â . 3.Place thermometer probe on the third drawer; Check the temp after ten minutes. 4.If the temp is not right in your need, you can adjust the meter to âF080â or âF090â to increase temperature or adjust the meter to âF060â or âF050âreduce temperature. 5.After adjusting the available temp, the machine will automatically save and memory your set data. 6.Take out the thermometer probe and finish the set. 7.It is normal that the âFâ or âOâ displays alternately when the machine is working. Tips: 1. According to the heat resistant temperature of silk screen, the highest temperature of this machine is 126â(52â). 2. Under normal conditions, 126â(52â) is appropriate for drying screen mesh. 3. It will indicate the last set parameters while used again because of its automatic data memorizing functions of the equipped intelligent temp controlling system. 4. Reference date: When the temperature is 126â(52â), drying the screen coated with our photosensitive emulsion for only one layer takes about 2mins. Drying screen without photosensitive emulsion takes about 1min. Please take it in reference while using. 4.5 Kilograms.